[Healeys] Turn Signal Bulbholder

i erbs eyera3000 at gmail.com
Mon Dec 9 11:05:46 MST 2019


The holder you got would fit my late BN4 nicely.

Ira Erbs
Portland,OR
1959 Austin Healey BN4
1967 MGB

On Mon, Dec 9, 2019, 9:49 AM Michael MacLean <rrengineer.mike at att.net>
wrote:

> In retrofitting an early two piece dash to my BN2 I have run into a snag
> with the turn signal indicator light assembly.  The light assembly I bought
> from one of the usual suspects is a two piece affair.  It has a very nice
> external threaded chrome bezel and an internal threaded green tube with a
> sort of lens coming up through the center and protruding into the bezel.
> This would be fine if it was mounted to a one piece dash, but as you can
> see in the picture the mounting hole is not centered in relation to the
> sheet metal above and behind the instrument panel.  Easy enough, just grind
> away until it fits.  This brings up another question.  If I didn't want to
> bugger up an original early two piece dash, what did the early light
> bulbholder fitting that would fit here look like?
> Mike MacLean
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191209/573f89dc/attachment.htm>


More information about the Healeys mailing list