[Healeys] Hole in the Dash

rick at ewilkins.com rick at ewilkins.com
Sun Dec 8 15:04:42 MST 2019

That’s where the screw holds the dash to the firewall bracket. 

Sent from my iPhone, so autocorrects may have inserted some odd words.

> On Dec 8, 2019, at 1:04 PM, Michael MacLean <rrengineer.mike at att.net> wrote:
> Can someone please tell me what the hole is above and to the left of the overdrive switch is for.  In researching pictures on the internet I see some dash panels have the hole and others do not.  Keep in mind I am putting an early two piece dash in my BN2 just because that is what I have that was given to me by the late Tom Rocke.  This is the reason the overdrive switch seems to be in the wrong location for a BN2.  The configuration of the early two piece dash has the ignition switch and the overdrive switch locations swapped.  I have seen some pictures of the hole to the right of the overdrive switch with a screw in it, but I have no idea what it bolts to in the back.  See picture of recently assembled dash after new paint job.
> <hole.jpg>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rick@ewilkins.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191208/e3c58d70/attachment.htm>

More information about the Healeys mailing list