[Healeys] Side/running lights BT7

[Mark Fawcett]

Figured it out. The double electrical connector in the engine compartment
on the firewall wasn't getting power from the red wire from the light
switch. The bullet connector was loose into the connector. It all works now.

Mark Fawcett


On Sat, Aug 3, 2019 at 12:04 PM Mark Fawcett <m.fawcett at cox.net> wrote:

> Just realized that my side/running lights front and rear don't light. I
> don't drive at night very often so I don't know how long this has been the
> case. Head lights, turn signals and brake lights operate as normal. Checked
> the dash lights and they work when the switch is in the middle position. I
> bypassed the light switch and put power directly to the light circuit, but
> nothing. I checked the fuse that I put in to protect the circuit, it's OK.
> Not sure where to go from here. Any help would be appreciated.
>
> Mark Fawcett
> 1959 BT7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190803/933a9f38/attachment.html>