[Healeys] Rear Shock Mounting Bolts

[Bob Spidell]

... and tighten the nut.


On 8/1/2019 7:27 PM, Roland Wilhelmy wrote:
> Use an open end wrench at an angle or a good sized screwdriver wedged 
> between head and wall.
> -Roland
>
> On Thu, Aug 1, 2019, 7:13 PM Harold Manifold <manifold at telus.net 
> <mailto:manifold at telus.net>> wrote:
>
>     What is the secret to tightening the rear shock mounting bolts on
>     an Armstrong lever arm shock absorber? After attacking the problem
>     unsuccessfully with many different tools I ground one side of an
>     inexpensive 9/16" socket until it would fit to hold the head of
>     the bolt. Surely BMC had a better method.
>
>     Harold
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190801/47e4a24c/attachment.html>