[Healeys] Steering Box R&R

[Ken Freese]

I am satisfied with the John Deere corn head grease stopping the leak from my freshly rebuilt box with double seals. The grill comes out any way you can. From the side with the splash panels off or below. If you can get the pitman arm off in the car fine, if not you can still get the box out. When putting the worm/shaft back in be careful and do not let the bearing cages fall down and get crushed.Ken Freese65 BJ8
----- Original Message -----
From: Bob Spidell <bspidell at comcast.net>
To: Healeys <healeys at autox.team.net>
Sent: Tue, 09 Apr 2019 08:02:02 -0700 (PDT)
Subject: [Healeys] Steering Box R&R

Anybody done one in situ in a BJ8?  The DWR steering box, which I had 
inquired about last June--I was put on a waiting list--is on its way.  
I've heard that getting a BJ8's grill out and in can be a bear; any 
advice or 'tricks?'  Other gotchas?

As daunting as this task appears, it comes at a good time as my original 
box is leaking pretty bad, and I'd probably need to get in on the bench 
to remedy that anyway.

TIA,

Bob

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/goldengt@cal.net


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190409/590a38fa/attachment.html>