[Healeys] Adjusting generator belt

[Michael Salter]

Actually Frank you don't really want the belt too tight.
With the bolts (all 4) loosened a little, pulling up hard on the generator body is sufficient.
The trick however, is to tighten the slide bolt on the underside of the generator while you pull up on the generator.

M
________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Frank Magnusson <fmags at cox.net>
Sent: Saturday, September 29, 2018 2:21:12 PM
To: healeys at autox.team.net
Subject: [Healeys] Adjusting generator belt

Hello once again.

Just got my generator back on and cannot seem to get the belt tightened.  Thought I used a big pry bar from above, but it keeps hitting the valve cover.  Do not think I did it from underneath last time.  Its been awhile and cannot recall.  I really am not *that* old, lol!

What do you guys use?

Thanks,
Frank
'65 BJ 8



_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180929/d57d705b/attachment.html>