[Healeys] BN1 Grilles

[Michael Salter]

As far as I can determine the peaked grill was used only on the
pre-production cars.
My car, B.#174 came to me without a grille and I have found that a standard
grille fits just fine.

M

On Wed, Sep 19, 2018 at 5:55 PM WILLIAM B LAWRENCE <YNOTINK at msn.com> wrote:

> In the midst of the refurbishment of my 100 I have discovered that the
> grille that came with the car is about 1/2" to 3/4" short of fitting the
> grille opening in the shroud in the vertical direction. I had considered
> this to be due to production tolerances and planned to modify the shroud to
> fit the grille, but then it occurred to me that there are a couple
> different grille designs for the 100s and that this being an early car may
> have been equipped with an earlier version of the grille.
>
>
> Does anyone have any information on whether any early cars were equipped
> with the earlier peaked grille (as used on the prototype) or how many if
> any were equipped with the interim flat topped grille and whether there
> would have been differences in the size of the grille opening.
>
>
> If I have the wrong grille I would like to explore acquiring the correct
> part rather than modifying the shroud.
>
>
> Thanks to the group.
>
>
> Bill Lawrence
>
> BN1 #554
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180919/aa0306c0/attachment.html>