[Healeys] Mounting filter on SU HD6s.

[Bob Spidell]

http://aptfast.com/showitem.aspx?id=101065&name=H6%2FHS6(1.75%22)%20Billet%20Aluminum%20Stubstack&

The owner of APT, David Anton, is English I believe.  You could give him 
a call.  His site doesn't show them for HD8s, yet he provided a pair for 
me to test on my BJ8 and they worked beautifully.

Bob

On 11/26/2018 3:02 AM, simon.lachlan at alexarevel.plus.com wrote:
>
> Thank you everybody for the suggestions regarding tapping my HD carbs. 
> Some really good ideas.
>
> With reference to that query, an elegant solution has been proposed. 
> ie I could put in stub-stacks, maybe adapt them slightly and tighten 
> everything up with allen-key bolts coming in from the back.
>
> So far, in the UK, I haven’t had much luck (none) in finding stub 
> stacks that are designated for HD6s. The attached is sold as HS6 
> compatible and the vendor says HS6 only.
>
> So, the question:- Is he correct? They*/_look_/* as if they’ll fit 
> onto an HD6 but, without both carbs in front of me, it’s hard to tell.
>
> Are the drillings in the back plates – where the air goes in – the same?
>
> Thanks,
>
> Simon
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20181126/923a2b5c/attachment.html>