[Healeys] bolt identification

[Michael Oritt]

Hi John--

Check this out:

http://3.bp.blogspot.com/-2zllShyvv34/UQLGj7XqZjI/AAAAAAAAPUg/e1--MCxAPKY/s1600/Bee:1.jpg

Happy Thanksgiving to you and Cindi.

Best--Michael Oritt

On Wed, Nov 21, 2018 at 10:19 PM John Vrugtman <javrugtman at htcnet.org>
wrote:

> https://en.wikipedia.org/wiki/Rubery_Owen
>
> Bees bolts seem to be very obscure, saw a picture of one, but no reference
> to the manufacturer
>
> On 11/21/2018 6:58 PM, warthodson at aol.com wrote:
>
> I was sorting thru a box of hardware & found two bolts that I cannot
> identify. They both are approx. 1/4" diameter. They both have the same
> thread per inch. According to my thread gage they are between 24 & 26 TPI.
> So call it 25 TPI. I do not have a metric thread gage to check them against.
>
> One is marked "Rubery Owen B28-35" on the head & measures about 5/8" long.
> The other is marked "BEES" & has a embossed emblem of a bee on the head &
> measures about 3/4" long. The lengths do not include the head, of course.
> No other markings on the heads.
> They will not accept a BSF nut, UNF or UNC nut or any metric nuts that I
> have.
>
> Can anyone ID these for me?
>
> Thanks,
> Gary Hodson
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20181121/071c2f88/attachment.html>