[Healeys] bolt identification
javrugtman at htcnet.org
Wed Nov 21 19:41:34 MST 2018
Bees bolts seem to be very obscure, saw a picture of one, but no
reference to the manufacturer
On 11/21/2018 6:58 PM, warthodson at aol.com wrote:
> I was sorting thru a box of hardware & found two bolts that I cannot
> identify. They both are approx. 1/4" diameter. They both have the same
> thread per inch. According to my thread gage they are between 24 & 26
> TPI. So call it 25 TPI. I do not have a metric thread gage to check
> them against.
> One is marked "Rubery Owen B28-35" on the head & measures about 5/8"
> long. The other is marked "BEES" & has a embossed emblem of a bee on
> the head & measures about 3/4" long. The lengths do not include the
> head, of course. No other markings on the heads.
> They will not accept a BSF nut, UNF or UNC nut or any metric nuts that
> I have.
> Can anyone ID these for me?
> Gary Hodson
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys