[Healeys] Questions of the day

[i erbs]

Im color blind. Can read a schematic, so i had the wire and trace colors
put on blue tape, when i replaced my harness. Funny thing was my mechanic
friend miss marked a couple of wires and i was able to figure it out.

Ira Erbs
Portland, OR
typos and artifacts are the fault of my phone

On Thu, Nov 8, 2018, 10:26 PM Bruce Steele <healeybruce at roadrunner.com
wrote:

> Bob, I agree it is extra work, but I wanted to be extra careful and
> thorough, especially the first time I had pulled everything out of dash
> when I did the interior and had the dash panel out.  My wiring wasn’t
> totally stock.  Now, I would feel comfortable doing the job with just the
> wiring diagram.  Indeed, I went sans tape when I installed my second wiring
> harness.  Yes, second.  Don’t ask.  I also installed a fuse block and made
> an auxiliary wiring diagram.
>
>
>
> Bruce Steele
>
> Brea, CA
>
> 1960 BN7
>
>
>
> *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of *Bob
> Spidell
> *Sent:* Thursday, November 08, 2018 12:10 PM
> *To:* healeys at autox.team.net
> *Subject:* Re: [Healeys] Questions of the day
>
>
>
> On the contrarian side, seems like extra work to me.  I wired a bare BN2
> chassis just using the schematic in the shop manual and going by the color
> codes.  Got it 100% correct, but one of the wires in the harness had the
> wrong colors and the rear turn signals didn't work right, so keep an eye
> out for that kind of goof.  Took a while to debug that one (even opened up
> the relay box).
>
> Bob
>
>
>
> On 11/8/2018 10:31 AM, Bruce Steele wrote:
>
> I second blue painters tape.
>
>
>
> Bruce Steele
>
> Brea, CA
>
> 1960 BN7
>
>
>
> *From:* Healeys [mailto:healeys-bounces at autox.team.net
> <healeys-bounces at autox.team.net>] *On Behalf Of *Team.net
> *Sent:* Thursday, November 08, 2018 3:50 AM
> *To:* Kees Oudesluijs <coudesluijs at chello.nl> <coudesluijs at chello.nl>
> *Cc:* healeys at autox.team.net
> *Subject:* Re: [Healeys] Questions of the day
>
>
>
> Use blue painters tape
>
> Easily removed
>
> It won’t tear up the loom
>
>
> On Nov 8, 2018, at 3:46 AM, Kees Oudesluijs <coudesluijs at chello.nl> wrote:
>
> I always use masking tape, cheap and easily written on with ballpoint,
> pencil or marker.
>
> Kees Oudesluijs
>
> Op 7-11-2018 om 22:23 schreef Michael MacLean:
>
> I have a good vacuum unit for a distributor with the markings 421943 and
> 7-18-12.  can anyone tell me the application of this unit?  Second
> question.  What is best to use to label the wire ends of my wiring harness
> for installation?
>
> Mike MacLean
>
>
>
>
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
>
> Virus-free. www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
>
>
>
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20181109/bfd3d43d/attachment.html>