[Healeys] Distributor cap and wires

warthodson at aol.com warthodson at aol.com
Sat Mar 10 07:38:07 MST 2018

Are you using copper core wires or carbon fiber core wires?
Gary Hodson
-----Original Message-----
From: Elton Schulz <eschulz at frontiernet.net>
To: Healey List <healeys at autox.team.net>
Sent: Sat, Mar 10, 2018 2:15 am
Subject: [Healeys] Distributor cap and wires

Fellow Listers,
I recently purchased a new Lucas side entry distributor cap and new 
ignition wires. I'm having no success in fastening the wires with the 
cap's screws.  The screws are right up against the bottom stops of the 
wire holes and the screws have too little wire to bite into. Try as I 
might, the wires pull out with no effort.  What am I missing? Should 
there be a thimble or sorts or something over the wire's end for the 
screw to catch?
Thanks for your help.
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/warthodson@aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180310/6de82a15/attachment.html>

More information about the Healeys mailing list