[Healeys] Stator tube wiring loom

i erbs eyera3000 at gmail.com
Mon Mar 5 23:24:29 MST 2018


It rests in the steering column . The stator tube goes through it and it
keeps the stator tube from rattling and centered in the steering column
about 1.5 inches long.

Ira Erbs
Portland, OR

On Mar 5, 2018 9:02 PM, "richard mayor" <boyracer466 at gmail.com> wrote:

> What is a "Lantern" spring?
>
> On Mon, Mar 5, 2018 at 6:15 PM, Curtis Arndt <cnaarndt at gmail.com> wrote:
>
>> Alan,
>>
>> Been there done that.  Typically the old stator tube is so rusty as to
>> make messing with this NOT worth my time and effort.  The wires are
>> sometimes near impossible to remove. Moss sells a really nice stator tube,
>> and the new wiring harness fits down very nicely without having to cut off
>> one of the bullets.  What I'm saying is that IF you can get the wires out,
>> the inside of the tube will still be a bloody mess.
>>
>> I know, I just built up a 100M trafficator switch for an owner in
>> Arizona.  His stator tube was very rusted and the wires would not budge.
>> In the trash it went, and I ordered one from Moss.  And yes, I saved the
>> almost impossible to find "Lantern" spring on the stator tube!
>>
>> Plus, who would want to pt their switch on a rusty old stator tube?
>>
>> I have not forgotten, just busy.  I'll email you about mailing the
>> battery cases to Michael
>>
>> Cheers,
>>
>> Curt
>>
>> On Mon, Mar 5, 2018 at 3:19 PM, Alan Seigrist <healey.nut at gmail.com>
>> wrote:
>>
>>> Maybe give oven cleaner a try?
>>>
>>> On Sun, Mar 4, 2018 at 8:15 PM, Bert Van Brande <bertvanbrande at yahoo.com
>>> > wrote:
>>>
>>>>
>>>> As I am ready to replace the stator wiring loom on the 56 100 BN2, I
>>>> find the old loom is completely stuck inside the tube.
>>>> I have no wires left on the trafficator end.  Pulling the wire on the
>>>> other end, there is no movement and I am afraid I will break the little
>>>> that is left from the brittle wires. (not that I need them)
>>>>
>>>> Any garage tricks to negotiate these 62 year old wires from the tube?
>>>> I already tried WD40 and some modest heat applied to outside of the tube
>>>> but no luck yet.
>>>>
>>>> Bert
>>>>
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation  $12.75
>>>> Archive: http://www.team.net/archive
>>>> Forums: http://www.team.net/forums
>>>>
>>>> Healeys at autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>
>>>> Unsubscribe/Manage: http://autox.team.net/mailman/
>>>> options/healeys/healey.nut at gmail.com
>>>>
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation  $12.75
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>>
>>> Healeys at autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>>
>>> Unsubscribe/Manage: http://autox.team.net/mailman/
>>> options/healeys/cnaarndt at gmail.com
>>>
>>>
>>>
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/
>> options/healeys/boyracer466 at gmail.com
>>
>>
>>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/eyera3000 at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180305/f8ee804b/attachment.html>


More information about the Healeys mailing list