[Healeys] BN2 original Tecalemit type oil filter

[mike brooks]

It was time to change the oil and filter again. As usual i had trouble getting a seal between the top and body of the filter holder. Simply, neither of the two supplied o rings are the correct size. Also as usual in my haste to get the car back on the road i neglected to take dimensions of the groove in the filter head which would enable me to get hold of the correct size o ring. Does anyone have a note of the correct o ring size? Having eventually achieved a seal with a combination of good luck and instant gasket, I am loathe to take it all apart again but would love to make the job easier for next time! I am not keen to change to a spin off filter.
Mike Brooks56 BN2Scotland
Sent from Yahoo Mail on Android
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180727/d99e0821/attachment.html>