[Healeys] Sump removal

[i erbs]

all the bolts need to be off. use some map gas and carefully heat a corner.
then try and thin/wide chisel or putty knife
Ira Erbs
Portland,OR
      _______                                  _______
     (______ \____1959 BN4____/ _______)
         (_________________________)
          BT7 engine and disk brakes


1967 MGB  [image: MG]

A racing car is an animal with a thousand adjustments. Mario Andretti
Please excuse random auto corrects and misspelled words


On Thu, Dec 6, 2018 at 12:45 PM <simon.lachlan at alexarevel.plus.com> wrote:

> I’m trying to get the sump (oil pan?) off my MkII 3000.
>
> I’ve given up for now but will check again that I’ve taken off all the
> bolts.
>
> It absolutely won’t shift and I’m finding it very hard to get an implement
> in with which to prise it open.
>
> I guess that it’s sealed with and cemented to the block with some gloop
> that just won’t shift.
>
> Is there a clever way to do this?
>
>
>
> What’s the magic answer?
>
> Thanks,
>
> Simon
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20181206/f8dbf62d/attachment.html>