[Healeys] Differential Locked

[David Nock]

Paper gaskets commonly shrink. Soak in water for a few minutes prior to installing 

Sent from my iPhone

> On Sep 27, 2017, at 5:11 PM, Michael MacLean <rrengineer.mike at att.net> wrote:
> 
> Finally installed the pumpkin in the newly painted differential case today.  Used Hylomar to seal it.  The paper gasket from Moss did not fit very well.  I needed to use my single hole paper punch to get it to fit.  Tightened it down and now the output flange is locked in place.  It moves back and forth a fraction of an inch but stops with a decided metallic clunk.  No, I did not install it upside down.  That actually can not be done the way the ring gear is "keyed" into the casing.  What the heck?
> Mike MacLean
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170927/d5941398/attachment.html>