[Healeys] Rear Axle Hub Removal
goldengt
goldengt at cal.net
Wed Sep 6 09:31:07 MDT 2017
I pull the axle out, reverse it and use a few lug nuts.Ken Freese 65 BJ8
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: Bob Haskell <rchaskell at earthlink.net> Date: 9/6/17 3:04 AM (GMT-08:00) To: Michael MacLean <rrengineer.mike at att.net>, Healey List <healeys at autox.team.net> Subject: Re: [Healeys] Rear Axle Hub Removal
Mike,
To remove the hub, use a 3 arm gear puller with a center piece piloted
on the axle. I don't like the idea of applying impact loads from a
slide hammer to bearings.
I bought a 12 point, 3/4" drive, Williams socket and used my lathe to
remove the chamfer. The steel was soft enough to cut; didn't need to
grind. I also have the Churchill 8 sided factory tool. It has a pilot
that fits in the axle which is nice. In my old age, I can't always
generate enough torque to loosen the nut with the factory tool. Could
make a longer rod.
Remember, the nut on the right hand side has left hand threads. There
is usually "RH" or "LH" stamped on one side of the nut near "MOWOG". Of
course, that side is probably not facing out.
Cheers,
Bob Haskell
AHCA 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php
On 09/05/2017 06:01 PM, Michael MacLean wrote:
> OK, figured out how to get bearing hub off rear axle with a bearing
> flange and slide hammer. Is the hub nut 2 3/16ths? Is there a socket
> available without the chamfer around the mouth of the socket so I can
> get it on that thin nut? Do you guys just buy a 2 3/16ths socket and
> grind the mouth flat? The nuts on my axle are all buggered up from
> someone in the past using a chisel to get them off and put them back on.
> Mike MacLean
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/goldengt@cal.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170906/46f6d661/attachment.html>
More information about the Healeys
mailing list