[Healeys] Right hand signal light

[Bob Spidell]

Sounds like something in the wiring, esp. if the running light works.  Check voltage along the wire with a voice coil-type voltmeter (I don't think a DVM would respond fast enough).  I haven't tried this myself, but the needle in the VM should bounce in time with the flasher if you've got voltage at each segment.


I've got a coil-type VM if you want to borrow it, but I'm not working at Xilinx anymore (or you can swing by).


Bob

--------------------------------
Bob Spidell - San Jose, CA

> On October 22, 2017 at 3:57 AM John Spaur <jmsdarch at sbcglobal.net> wrote:
> 
> 
>     The right hand front signal light stopped flashing. The rear lamps flash normally when the switch is operated. The left one works as it should. All lamps are good. When I turn on the headlights the running lights illuminate. I installed a known working 1157 combination running and signal light and it would not flash. When I test the flasher unit per the workshop manual by connecting the terminals B and L and operating the direction indicator switch the flasher lamps do not operate, thus the flasher is good. Testing the brake switch overriding relay per the manual gives the following results:
> 
>      
> 
>     Connecting terminal 1 to terminals 2 and 3 – left hand front and rear lamps flash.
> 
>     Connecting terminal 2 to terminals 6 and 7 – right hand rear lamp flashes but the right hand front does not.
> 
>      
> 
>     What should I check now?
> 
>      
> 
>     Thanks,
> 
>     John Spaur
> 
>     San Jose, CA
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20171022/7d0eca7e/attachment.html>