[Healeys] Brake lights

[Bob Spidell]

I just fitted 1157 LED running/brake lights to my BJ8 from these people, 
with no modifications (pos. gnd.):

*http://tinyurl.com/y7e74e6r*

I think the 100s use 1157s as well, but you'll need ballast resistors if 
you want to use your original flasher unit--Moss sells them.

Bob


On 10/15/2017 4:27 PM, Peter & Veronica wrote:
> ...did you use the Watson Streetworks switch? I've used that on both 
> my cars/
> *From:* Wayne Schultz
> *Sent:* Monday, October 16, 2017 7:45 AM
> *To:* healeys at autox.team.net
> *Subject:* [Healeys] Brake lights
> Hello,
>            My friend Bob, and I finished the conversion to a 
> mechanical brake switch on his 100/4. His hydraulic brake switch would 
> not work until pretty high pedal pressure. The mechanical switch 
> install was easy to do and works great. We made a small two wire 
> harness in braid from the original switch to the new switch install at 
> the pedal  and it looks factory to the casual eye. My question is, has 
> anyone done a LED brake / turn signal retrofit to the rear of a 100/4. 
> We were thinking  a bar led over the license plate. Would like it  to 
> to be inconspicuous when not lit. While trying to maintain originality 
> he is trying to not get rear ended by poor rear lights and a soccer 
> mom on her phone. Any ideas would be greatly appreciated.
>                            Wayne Schultz
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20171015/a7b62aa5/attachment.html>