[Healeys] engine fitting

[i erbs]

Right and left mounts on correctly?

On Nov 27, 2017 6:03 PM, <gablegerry at netscape.net> wrote:

> Put the engine back in my BN6 a few weeks back.  Started to attached the
> carburetors last week.  I had to lift up the engine a couple inches to get
> to the studs.  Got it all done, lowered the engine and now the jets lever
> connecting rod is stuck on the steering column tub. Also I had replace the
> motor mounts and am having problems lining up the base nuts.  Do I need to
> add to the carb's with spacers or shim up the motor mounts?
> Thanks
> Gerry
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/eyera3000 at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20171127/e3506278/attachment.html>