[Healeys] BN2 H4 SU rebuild

josef-eckert at t-online.de josef-eckert at t-online.de
Fri Nov 10 00:00:35 MST 2017

Hi Mike,
soak the cork jet seals in engine oil for at least one day before you fit 
them. Do the fit and centreing of the jets carefully. It a little fiddle, 
as you need to fit the damper and damper domes first before. Then check the 
move of the damper and to hhear a "plop" when it reached the down position.
Adjust the float level correctly, use a 11mm drill.
Josef Eckert
Betreff: [Healeys] BN2 H4 SU rebuild
Datum: 2017-11-09T22:39:38+0100
Von: "mike brooks" <hypercubic at yahoo.co.uk>
An: "healeys at autox.team.net" <healeys at autox.team.net>
Just got the two H4 SU carb bodies back from Burlen after they have 
rebushed the throttle spindles and fitted new spindles and discs. I'm doing 
the rest of the rebuild myself, using Burlen's rebuild kits. Does anyone 
who's done this themselves have any tips or tricks for me?
Mike Brooks
'56 BN2

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20171110/12054c27/attachment.html>

More information about the Healeys mailing list