[Healeys] cable

[John Spaur]

Not sure what it takes to get to the back of the speedo but on my BT7 I
unscrew the cable housing and pull out the cable. A new one can be slipped
in if the housing is good.

John
'62 BT7

-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob
England
Sent: Sunday, May 28, 2017 5:07 PM
To: 'Healey List' <healeys at autox.team.net>
Subject: Re: [Healeys] cable

Finally a question I can help with!  As a new Healy owner I've been lurking
on the list for the past few weeks, soaking up the questions and answers as
best a new Healy owner can.

Answer to your question Mike : from above.  Definitely.  Take the seats out,
remove the radio console and transmission tunnel, and all is exposed.  Did
this earlier today on our BJ8 to replace a missing engine/bell housing bolt
and did not take too long at all.

Bob

-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Mike S
Sent: May 28, 2017 5:00 PM
To: Healey List
Subject: [Healeys] cable

Any hints on replacing the speedometer cable on my BJ8?  From above or
below.....?

--
Mike