[Healeys] This has me stumped - solution!

Oudesluys coudesluijs at chello.nl
Mon May 22 15:46:01 MDT 2017


Well, take apart and clean the bullets and connectors. Also make some 
extra ground connections to the black wires to chassis/body to prevent 
future p[roblems and overload of the black wire ground circuit.
Kees Oudesluijs

Op 22-5-2017 om 22:08 schreef BJ8Healeys:
>
> The problem with my headlamps refusing to illuminate in spite of power 
> to them at their harness connectors and apparent adequate ground 
> connections was, as many of you suggested:  a bad ground.  However, 
> the bad ground was in a wire to the right front side marker light.  I 
> soldered on a new bullet terminal, and now all is well.  I'm still not 
> quite clear on why this would happen, since each headlamp has its own 
> separate ground wire - although all of the black wires in the front of 
> the car are connected together via the typical Lucas wiring connectors.
>
> Thanks to all for your suggestions!
>
> Steve Byers
>
> HBJ8L/36666
>
> BJ8 Registry
>
> AHCA Delegate at Large
>
> Havelock, NC
>
> TARHEELY license plate
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170522/c4127fe5/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 19755 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20170522/c4127fe5/attachment.jpg>


More information about the Healeys mailing list