[Healeys] Heat Shields

R. Lindsay 050.rpl at gmail.com
Sat Mar 4 12:01:44 MST 2017


Thank you Roland. 

Price Lindsay

Cell: 630-841-6300
Email: 050.rpl at gmail.com

Sent from my iPhone

> On Mar 4, 2017, at 1:58 PM, sentenac.rw at gmail.com wrote:
> 
> It is a two-part refinishing process.  First part is two coats of
> Rustoleum Clean Metal Primer 7780830.  Then you apply a very light
> coat of MinWax Polyurethane Clear Satin to seal the surface and make
> it cleanable.  Both are spray cans and each can contains enough for a
> dozen cars :-)  You don't want the urethane to look shiny.  The
> instructions are included with Moss's kit.  The primer is a nice
> off-white that Roger found to match the original color.
> 
> -Roland
> BN1 #724 with heat shields installed but not ready for the road
> 
>> On Sat, 4 Mar 2017 12:24:51 -0500, you wrote:
>> 
>> I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos.  I’ve looked through the archives and on John Simm’s site and can’t find the note.  Does anyone know the finish he used or is there someone that can provide me with a proper finish?
>> 
>> Thank you in advance.
>> 
>> Price Lindsay
>> 67 BJ8
>> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 


More information about the Healeys mailing list