[Healeys] dumb transmission question

[John Spaur]

Great info, very thorough.

 

John S

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Michael Salter
Sent: Wednesday, June 21, 2017 11:10 AM
To: Jonathan Einhorn <einhornlawoffice at gmail.com>
Cc: healey list <healeys at autox.team.net>
Subject: Re: [Healeys] dumb transmission question

 

Hi Jonathan,

No dumb questions.......  

The BN2 transmission is very similar to the 100/6. The bell housing is different but interchangeable as the 100/6 uses an hydraulic clutch whereas the BN2 clutch is mechanically operated.

The 1st motion shaft on the 100/6 is longer but can be cut down to allow use of the transmission in a BN2.

The BN1 transmission, although completely different from a 100/6 could be replaced by one if a BN2 bell housing and clutch were used and the input shaft was shortened.

I think that is all of... others may have thoughts.

Michael S

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170621/f410e9e9/attachment.html>