[Healeys] Shroud Repair.

Bob Spidell bspidell at comcast.net
Mon Jul 10 22:26:57 MDT 2017


Didn't they call it 'heliarc' back then?


On 7/10/2017 5:50 PM, richard mayor wrote:
> All the various panels that make up the shroud were TIG welded by Jensen.
>
> On Mon, Jul 10, 2017 at 11:23 AM, Henry Morrison <dos_gusanos at msn.com 
> <mailto:dos_gusanos at msn.com>> wrote:
>
>     A gap that big should have a new piece of Aluminum gas welded back
>     in (if you can find the right guy) then the metal can be hammered
>     back in to shape. TIG weld usually are too hard and crack when
>     worked and tend to get bondo over the tops of them.  I have never
>     seen any "factory applied" filler in any of the cars I have worked
>     on.  I don't believe the BMC factory ever used it.
>
>
>     Cheers,
>
>
>     Henry Morrison, Albuquerque, NM
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170710/7ba870a3/attachment.html>


More information about the Healeys mailing list