[Healeys] 100 stamped aluminium trim screws

[goldengt at cal.net]

I am confused by the Roger Moment articles, Moss catalog, and BCS catalog on the proper screws for the aluminium sill and shut face plates for a BN2. Should it be #6 or #4 and should it be pan head, truss head, or pozidrive with integral flange?I did #4 truss head on my BJ8 which might be wrong.Thanks,Ken Freese
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170106/659c2369/attachment.html>