[Healeys] Water Pump Pulley Circumference

[Chris Dimmock]

Hey Patrick, why don't you press the pulley off the old pump and reuse it on the new pump?
The only repro water pumps I've bought are the BJ8 ones. They have a pulley that just looks totally wrong. Too big & square sided.
Use the old one. 
Best
Chris 

Sent from my iPhone

> On 28 Feb. 2017, at 5:32 pm, Patrick & Caroline Quinn <p_cquinn at tpg.com.au> wrote:
> 
> Greetings
>  
> Today the new six-cylinder water pump for the BN3 arrived from AH Spares.
>  
> I have noticed that the ‘within-the-groove’ circumference of the new pump is 11 ½ inches, while the ‘within-the-groove’ circumference of the old (original) pump is 14 inches.
>  
> Apart from the pump running a little faster I can’t see that it will make for any other differences.
>  
> Does anyone have a pump they can conveniently measure please? Plus any comments would be appreciated.
>  
> Many thanks
>  
> Patrick Quinn
> Blue Mountains, Australia
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170228/c5edb2e1/attachment.html>