[Healeys] BJ8 - shock problems

[richard mayor]

How can the bolts be upside down?  Please describe it better so we can help.

On Sat, Feb 4, 2017 at 12:48 PM, <rft2 at aol.com> wrote:

> In an attempt to tighten up the front end on my BJ8, I've purchased
> reconditioned armstrong shocks for the front and back.  Starting into the
> project, I'm already at my first challenge.  On the passenger side all four
> bolts are upside down and when I try to loosen the bolts just spin.
>
> Reading through some articles by Norman Nock, it sounds like these bolts
> may have at some point come loose, striped the threads on both the bolts
> and shock plate, or striped off the nuts.
>
> Does anyone have suggestions on how I should proceed?
>
> *Mal Hickok*
> *Richland, MI*
> *BJ8 - 1967*
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/boyracer466 at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170205/6033ee94/attachment.html>