[Healeys] Healey BN1 Head gasket

Alan Seigrist healey.nut at gmail.com
Tue Aug 29 21:26:27 MDT 2017


You have to be careful not to mill the block and head too much otherwise
you will get a misalignment of the cooling channels.

On Wed, Aug 30, 2017 at 12:46 AM, Wayne Schultz <waschu2 at gmail.com> wrote:

> Hello,
>
>            My friend Bob had a problem with his Early BN1. The engine was
> rebuilt 2K miles ago or so and after several trips at speed on the highway
> cylinders 2 and 3 lost compression. The picture explains what we found when
> we pulled the head. The head has a 4 thousandth warp between cylinders 2
> and 3 and a 2 thousandth warp between cylinders 1 and 2. The engine was
> rebuilt by the previous owner so we don't know what was done , but the head
> looks like it was milled before. Bob  had planed on installing a aluminum
> head soon anyway so not a big deal. I thought people would like the
> picture.  We are installing a Denis Welsh head with new hardware and their
> steel head gasket.
>
>                                        Wayne
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/healey.nut at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170830/1cff63bf/attachment.html>


More information about the Healeys mailing list