[Healeys] Tool for removing SU carbs
ah3000me at gmail.com
Fri Aug 25 06:19:44 MDT 2017
On my BJ8, I can work my arm and wrist in the shape of the middle tool and
get under the carbs from the outside to reach the inside bolts. It's
fiddly, but doable.
On Thu, Aug 24, 2017 at 5:13 PM, Bob Simmen <rsimmen at nc.rr.com> wrote:
> Having just received the Sept. 2017 issue of Healey Marque Magazine, I
> quickly read the Technical Service Bulletin article Big Healey, Big
> Carburetors. I will be mounting my rebuilt carbs in the next week or two.
> On page 39 it show a picture of “Special tools required for nut removal”
> (see attached). Although I have a large supply of the tool on the left,
> and the tool on the right is always on my workbench, I am in desperate of
> need of the tool in the middle. Does anyone have a part number and source
> that I might be able to purchase this wrench.
> Thanks in advance for your help.
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Healeys at autox.team.net
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/ah3000me at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys