[Healeys] BN2 Speedo Angle Drive

[Michael MacLean]

OK, I am now told by my transmission rebuilder not to use the BN1 angle drive because the cable end of the drive is a different size thread than the 4 speed transmission.Mike MacLean
 

    On Wednesday, August 16, 2017 11:15 AM, Bob Spidell <bspidell at comcast.net> wrote:
 

  Moss lists it in their catalog.  Pricey as hell--$229.99--but they should have them.  Part# 768-020.
  
 On 8/15/2017 7:22 PM, Michael MacLean wrote:
  
  I need the speedo angle drive unit that screws into the overdrive for my transmission rebuild going on right now.  There are no angle drives available for the BN2 4 speed side shift trans so the big retailers are offering the BN1 speedo angle drive for the BN2 transmission.  Since the gearing is different, will the speedo be off because of this?  Will I merely need to get the speedo re-calibrated? Mike MacLean
   
 
 
 _______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net



   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170816/15a390ec/attachment.html>