[Healeys] I really need some pictures.

[David Porter]

Perry, et al.

  since there is a disagreement about this flap, I have compromised a 
bit.  Since one needs that piece to wrap the header bar and wood bow, 
what I did was to move the "flap" a bit higher so the chrome frame is 
still exposed a bit. I should have it done by mid-day tomorrow. I'll 
post my pictures then or soon after... dave


On 8/9/2017 6:28 PM, Perry wrote:
>
> David
>
> I’ll get a couple photos  of our 100 with a Robins top and get them to 
> you in a bit.
>
> Perry
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for 
> Windows 10
>
> *From: *David Porter <mailto:frogeye at porterscustom.com>
> *Sent: *Wednesday, August 9, 2017 8:24 PM
> *To: *S. Carr <mailto:britfan1 at epix.net>; healeys at autox team. net 
> <mailto:healeys at autox.team.net>
> *Subject: *Re: [Healeys] I really need some pictures.
>
> Well.... After studying a dozen good pictures, it is clear that the top
>
> in the Boras Motor website  (
>
> http://healeyspecialists.com/making-a-complete-new-interior-for-a-bn1/ )
>
> is not the Robins top that we get from Moss. The Boras header wrap is
>
> sans the secondary flap and it seems might be more prone to allow water
>
> to enter. Again the pictures just aren't conclusive. I had it done
>
> (almost) as the pixs Dave Nock sent, then decided to try the Boras
>
> method and it requires folding the flap back on top of itself in a way
>
> that just doesn't seem logical, given the Brits love of simplicity..
>
> back to the drawing board.
>
> On 8/8/2017 8:50 AM, S. Carr wrote:
>
> > I'm sure Dave isn't the only one who'd find those photos useful -- I
>
> > certainly could use them too!
>
> >
>
> > Sarah Carr
>
> > BN1 (still under restoration) in PA
>
> >
>
> > -----Original Message----- From: David Porter
>
> > Sent: Monday, August 07, 2017 8:04 PM
>
> > To: healeys at autox team. net
>
> > Subject: [Healeys] I really need some pictures.
>
> >
>
> > Despite the excellent Moment/Anderson restoration guide there are no
>
> > usable pictures of how the 100 convertible top is attached with the
>
> > secondary flap at the header.
>
> > Can someone send me a few close ups of the way it should be.
>
> > Thanks!
>
> > Dave
>
> >
>
> >
>
> >
>
> >
>
> -- 
>
> Dave Porter Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM
>
> 87107 505-352-1378 Go HERE: my world www.porterbikes.com/
>
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/archive
>
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
>
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/healeyguy@aol.com
>

-- 
Dave Porter Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM 
87107 505-352-1378 Go HERE: my world www.porterbikes.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170809/66987143/attachment.html>