[Healeys] BJ8 Windshield Replacement

[Charlie Schott]

I've done it on a BJ8 and a BT7 windshield and it's not hard to do. Make 
sure that you have good corner brackets and the right length screws. The 
hardest part is pulling the lower seal thru the T slot. Use plenty of liquid 
dishwater soap and grab the end with vice grips to pull it.

Regards,

Charlie Schott

-----Original Message----- 
From: Bob Spidell
Sent: Saturday, April 08, 2017 1:51 PM
To: Healeys
Subject: [Healeys] BJ8 Windshield Replacement

Listers,

Anyone replaced the windshield--just the glass and enclosing seal--on a
BJ8?  I have new glass, would order the seal kit from Moss (part#
682-028), and have a 'pro' do the installation (unless this is easy
enough for a ham-fisted DIYer).  I don't want to pull the whole
thing--wind wings and all--just the 'main' glass. Anybody done this, or
is it best to let the pro do it?

TIA,
Bob

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/schottc@knology.net