[Healeys] BJ8 Windshield Replacement

[John Spaur]

For my BT7 there are two thicknesses of glass available. The thicker glass
is needed for a proper fit with the rubber seal. The thinner glass will
allow the soft top rail to pull the upper chrome trim from the glass. I
don't know if there are two different glass thicknesses for a BJ8.

John

-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob
Spidell
Sent: Saturday, April 8, 2017 11:51 AM
To: Healeys <healeys at autox.team.net>
Subject: [Healeys] BJ8 Windshield Replacement

Listers,

Anyone replaced the windshield--just the glass and enclosing seal--on a BJ8?
I have new glass, would order the seal kit from Moss (part# 682-028), and
have a 'pro' do the installation (unless this is easy enough for a
ham-fisted DIYer).  I don't want to pull the whole thing--wind wings and
all--just the 'main' glass. Anybody done this, or is it best to let the pro
do it?

TIA,
Bob

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net