[Healeys] Throttle Cross-shaft

[Bluehealey]

The captive nuts are fitted to the inside of the plenum (air box) that runs transverse across the cockpit. Since they are invisible from below they must have been filled or skimmed over.  The nuts should be visible, on the floor of the plenum, through the letter box opening that the heater unit blows through. Locate the nuts and poke them through from the inside.

Alan - from my iPad

> On 4 Sep 2016, at 16:42, Bruce Peters <rv9aplane at gmail.com> wrote:
> 
> Tim and Keith, they are no welded nuts. There is literally no indication a cross shaft was ever mounted, yet I'm sure there was. 
> 
> Sent from my iPad
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bluehealey@gmail.com
>