[Healeys] FW: BJ8 Bonnet/hood hinge removal and replace anti-rattle washers
llennep at verizon.net
llennep at verizon.net
Wed Nov 16 13:49:26 MST 2016
Bob,
Rather than do all that fuss just do this. Get a piece of trunk seal for MGB. Might even find one at a junk yard. Cut 4 pieces about one foot long each. Press them in each corner on the lip of the shroud. Voila! Done! I have done this on my two cars and it stops the hood shake.
Keith
On 11/16/16, Robert F. Begani wrote:
Dear List:
My BJ8 engine was removed and machined last spring. It has been reassembled and painted since then and waiting installation. Now I come to the other tasks on my wish list before installation.
The hood has always shaken rather than remain stable. How do I remove the hinges and replace the anti-rattle washers. Looking under the dash, it seems they are incased in a metal shroud or covering with no way to get at the hinge bolt assembly.
Regards,
Bob Begani
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/llennep@verizon.net
More information about the Healeys
mailing list