[Healeys] Side Curtain Bracket

[warthodson at aol.com]

Charlie,
The front side curtain bracket uses the same wing nut that is used to retain the rear side curtain bracket. Moss #805-110
Interestingly, I can find the wing nut in the Moss online catalog, but Moss says (2) are required. I think it should say (4) are required. Also, the wing nut is not shown with the side curtains in their online catalog. Only with the door accessories. 
Gary Hodson
 
 
-----Original Message-----
From: Charlie Schott <schottc at knology.net>
To: Chris Dimmock <austin.healey at gmail.com>
Cc: Steve B. Gerow <steveg at abrazosdata.com>; healeys <healeys at autox.team.net>
Sent: Thu, May 12, 2016 6:39 pm
Subject: Re: [Healeys] Side Curtain Bracket

The post of the front side curtain bracket on a BT7 is threaded. I can't see 
that it takes a nut, so why is it threaded? Or does it take a nut? Thanks.

Regards,

Charlie Schott




_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/warthodson@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160513/0210c2d4/attachment.html>