[Healeys] Transmission

[David Nock British Car Specialists]

All the 6 cylinder transmissions are interchangeable except for the top shift to side shifters. the bell housings are all the same. There is an issue with the overdrive side cover hitting if you put the later overdrive in a earlier car. Also the early  transmissions did not have a seal at the front of the transmission. they used a reverse screw however you can modify the early bell housing to accept a seal.



> On Mar 18, 2016, at 7:33 AM, Bob & Marion Merten <bobmert at fuse.net> wrote:
> 
> I have a transmission for a 100-6 BN4, BN6 for sale on e-bay and was ask the question if it could be fitted to a BT-7. I don’t know if the different input shaft, bell housing bolt holes etc. allow the earlier Transmission to be fitted to the BT-7. Any help is appreciated.
> Thanks,
> Bob Merten
> Ohio Valley Austin Healey Club 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net
> 

David Nock
British Car Specialists
Stockton Ca
www.britishcarspecialists.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160320/a523df1e/attachment.html>