[Healeys] Needed- BN1 Hood

[Curtis Arndt]

Mark,

What is your "Body" number?   It's the second number on an aluminum plate
screwed on the right hand side of the firewall in the engine compartment.
It's most likely a two, three or four digit number for a BN1. The first
number is always the "Batch" number and could be the same for up to 700
cars and is irrelevant for now.

Up to body no. 3396 the bonnets (proper English term) were aluminum.  From
body no.3397 onward the bonnets were steel.  BTW hood is the proper English
term for the convertible top.

The after market louvered bonnets from Moss and various suppliers are all
aluminum and quite nice, but they've gotten rather pricey.

They come up on eBay from time to time and run $300-$600.  BTW, the bonnets
along with the boot (trunk) lid were stamped with the body number from the
factory.

Prepare to have this professionally fitted by a good body man.

Cheers,

Curt

On Wed, Jun 29, 2016 at 5:23 PM, mark henderson <markhenderson3376 at gmail.com
> wrote:

> First time writing to the list, I am in need for an engine hood for my
> BN1.  Would like a presentable piece, with louvers or without, a piece or a
> skin I can work with.  Any help is much appreciated.
> Regards, Mark (AH Club member in Atlanta, GA)
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160629/d384ba39/attachment.html>