[Healeys] BN-1 brake master

[i erbs]

I would contact http://www.applehydraulics.com/
Apple hydraulics about their doing the work or to see if they have a
replacement unit.
NFI

Ira Erbs
Portland,OR
      _______                                  _______
     (______ \____1959 BN4____/ _______)
         (_________________________)
          BT7 engine and disk brakes

Please excuse random auto corrects and misspelled words

On Tue, Jun 14, 2016 at 7:30 AM, Wayne Schultz <waschu2 at gmail.com> wrote:

> Hello,
>
>                   Helping my friend with his Healey BN-1. We have
> installed front disc brakes along with other work to have it ready for
> Summer driving. I  pulled the brake master because it was leaking from both
> ends and the drum brakes would drag.  Turns out the master cylinder is an
> original part that had been sleeved in brass. The bleed washer is totally
> flat with none of the original bumps left.  We bought a new TRW brake
> master and a rebuild kit from AH Spares. The rebuild kit does not have the
> bleed washer or the crush gasket for the end nut so I don't have what I
> need to rebuild the original cylinder.  I am aware of the past  TRW
> cylinder problems. Are people still having problems with TRW brake masters
> for the Healey 100 before I install ours?   Last question, does anyone know
> of a source for a full rebuild kit with the bleed washer and crush washer
> for the BN-1 brake master?
>
>
> Regards
>             Wayne Schultz
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160614/07ad0b3f/attachment.html>