[Healeys] 100 Heater Valve

[Bert Van Brande]

I have one like the one on the right but it had a broken stem. It has a slot now to manipulate with a screw driver, it works fine this way.
I'll send a pic if you still need one and don't mind the small issue.
Bert  

      From: Michael Salter <michaelsalter at gmail.com>
 To: "healeys at autox.team.net" <healeys at autox.team.net> 
 Sent: Monday, July 18, 2016 9:52 AM
 Subject: [Healeys] 100 Heater Valve
   
I am stuck for a heater valve for the early 100 that I'm restoring. 
This is an early car and should have a heater valve (on the cylinder head) that looks like the one on the left in this picture. (Copied from the Concours Guidelines) 

 
I have purchased some lengths on hex brass stock with a view to making one but I'm coming to the realization that this is going to be a lot more complicated than I had anticipated and I would be better off to try to acquire any parts of such a valve as a starting point.
Does anyone have a complete valve or any parts of one that I could purchase.
Thanks,Michael S
BN1 #174


_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bertvanbrande@yahoo.com



  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160720/0a93bc98/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 518960 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20160720/0a93bc98/attachment.png>