[Healeys] Windscreen washer issue

[Paul Leeks]

Thanks Kees

I had the tubes correct as per the in the marked S(upply) and J(et)
input/output on the pump.  However, I have swapped them around and the
result seems to be the same.

Perhaps the pump (bought from AH Spares) doesn't have a built-in non-return
valve?

Cheers

Paul


Message: 20
Date: Fri, 1 Jan 2016 17:24:34 +0100
From: Oudesluys <coudesluijs at chello.nl>
To: healeys at autox.team.net
Subject: Re: [Healeys] Windscreen washer issue
Message-ID: <5686A842.7040806 at chello.nl>
Content-Type: text/plain; charset="utf-8"; Format="flowed"


There should be a non-return valve between pump and nozzle/jet. m I
think that most pumps have this valve build in.
I presume you have not pump input and output mixed up?
Kees Oudesluijs

-- 

 [image: Glasgows]Paul Leeks | Director
T 01772 767505 F 01772 767566 M 07718 523778 E paull at glasgows.co.uk

Glasgows
81-91 Waterloo Road | Preston | Lancashire | PR2 1BH | www.glasgows.co.uk
<http://vimeo.com/glasgowsevents>
<https://www.youtube.com/user/GlasgowsEvents>
<https://www.flickr.com/photos/glasgowsevents>

-- 
EMAIL DISCLAIMER
Any opinions expressed in this email are those of the individual and not 
necessarily those of Glasgows.It is intended only for the person(s) to 
whom it is addressed and may contain privileged and/or confidential 
information. Accordingly, the copying, dissemination, distribution or use 
of this message to any other person may constitute a breach of civil or 
criminal law. Please notify the sender immediately if you have received 
this email by mistake and delete it from your system. Glasgows is a trading 
style of R Glasgow & Associates Public Relations Limited. Registered in 
England & Wales No. 2257022.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160102/abd2f641/attachment.html>