[Healeys] Indicator fault

[John Rowe]

Many thanks to all who replied with their wisdom.

It turns out it was a corrosion problem. I just had to dig deeper with 
the wirebrush and emery paper.


The earth connection from the right front indicator light joins the 
wiring harness behind the LHS splash guard under the LHS mudguard.
Cleaned that connection and VOILA Lucas was back in charge. (If you will 
excuse the pun).

We now have all indicators working correctly but an non working 
overdrive problem to solve.

All these problems after 15 years since a full restoration.

Regards from West OZ

John Rowe
1959 3000 #110



On 26/02/2016 9:46 PM, John Rowe wrote:
> Hi All
>
> I am looking for some wisdom about an indicator problem. Unfortunately 
> the wisdom in my garage is not up to the task.
>
> My left hand indicator works perfectly.
>
> My right hand indicator lights both front and rear lights but does not 
> blink.
>
> I have followed the trouble shooting guide in the Workshop Manual but 
> it does not cover this situation.
>
> The flasher can appears to be OK as the LHS works normally.
>
> I have connected the RHS wires of the Stop light relay as per the 
> Workshop manual trouble shooting guide and there is no change.
>
> I am at a lost at to what the problem is and the appropriate solution.
>
> As all ways any help would be appreciated.
>
> Regards
>
> John Rowe
> Perth
> Western Australia
> 1959 3000 BT7
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160229/063e5c33/attachment.html>