[Healeys] BJ8 top frame

[David Nock]

Add some shims under the front studs of the frame. This will angle the frame plate and raise the rear of the upper wood trim.

David Nock
healeydoc at sbcglobal.net
209 948 8767
www.britishcarspecialists.com

From: Stephen Hutchings 
Sent: Monday, February 01, 2016 6:30 AM
To: Healeys List 
Subject: [Healeys] BJ8 top frame

Now that I've had a chance to put the top frame on my car, I'm having trouble lining up the two halves of the part that surrounds the windows. It went together properly when off the car, so it looks like the little rubber bump stops that screw into the chrome surround are preventing the upright half of the window frame from resting down far enough.
Anyone have experience with this?
I've attached a photo and, yes, I know that the vinyl cladding is not the proper cream colour.

Thanks,
Stephen BJ8




--------------------------------------------------------------------------------
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160201/5f3fd43f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Top frame window opening.jpg
Type: image/jpeg
Size: 630162 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20160201/5f3fd43f/attachment.jpg>