[Healeys] Throw out bearing

[Oudesluys]

May be you could do a similar job?

http://www.mgexp.com/article/diy-roller-throwout-bearing.html

or perhaps you can experiment with this, it is not a very expensive item:

http://www.englishparts.com/products/Austin-Healey/BEARING--THROW-OUT--CLUTCH-RELEASE--SPITFIRE-1971-1980--MGM-1975-1980/1769055/HD3268X.html

Denis Welch should have one I believe.

Kees Oudesluijs




Op 17-12-2016 om 18:23 schreef Bruce Steele:
>
> After pulling the engine and transmission to address the oil in the 
> coolant problem, I see that the throw out bearing is probably 75% worn 
> while the clutch disk is maybe 25% worn. Short of the Toyota 
> transplant, has anyone come up with a modification to replace the 
> carbon disk throw out bearing with a modern concentric bearing?
>
> Bruce Steele
>
> Brea, CA
>
> 1960 BN7
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20161217/9dc4405a/attachment.html>