[Healeys] lightened flywheel

[i erbs]

Tricarb at aol.com is Bill's email. Not sure if he has a
Any parts left to sell. Modifying the flywheel requires precision, I bought
a bj8 flywheel and had it lightened, then sold my bt7 wheel to recover some
of the costs.
Mr. Ira Erbs
Portland,OR
1959 Austin Healey 100-6
please forgive odd words and auto corrects as   my phone cannot understand
my misspellings

On Aug 26, 2016 5:20 AM, "Mark Fawcett" <m.fawcett at cox.net> wrote:

> List,
> Many years ago I purchased a lightened flywheel from Bolt On Healeys. I
> never installed it, but now I think I'm going to. The flywheel I bought was
> for an early 3000. Now I'd like to put a later clutch instead of the 3
> finger style clutch. Can I modify the older flywheel to be able to use the
> later style diaphragm pressure plate? I think I should be able to thread
> bolts into the existing bolt holes then have the head machined flush. Then
> have new bolt holes drilled and tapped.  Has anyone done this, or I would
> appreciate any suggestions.
> Or if Bill Bolton is still out there and offering lightened flywheels that
> will take the 9 1/2" pressure plate, I might do that. I haven't been able
> to locate him on line.
>
> Thanks,
> Mark Fawcett
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/eyera3000 at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160826/583021af/attachment.html>