[Healeys] 8-way Flasher/brake switch box

[Per Schoerner]

Simon
A simple rule as a guide is Ampere=Watt/Volt. So if you have 45 watts of light bulbs you would need A=45/12 = 4. The relays you have found you say are 5 or 10 ampere units, that is what they are capable to handle. So if you use 10 A units you will be on the safe side.

Per

Skickat från min iPhone

> 7 apr. 2016 kl. 17:31 skrev Simon Lachlan <simon.lachlan at homecall.co.uk>:
> 
> I am contemplating rebuilding a spare unit with 2 dpdt relays. I can find them on eBay at a sensible price but, in my customary ignorance about amps, volts, kilowatts and the like, I don’t know what amperage to go for. 5 amps or 10 amps seems to be the main choice. 5 amp units tend to be smaller which is good.
> Suggestions would be welcome.
> Any photos or whatever would be appreciated. I was inspired by an article by Jean Caron. However the version that I’ve got is a rather poor quality b&w pdf, so anything would help.
> Thanks,
> Simon
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/per@schoerner.se
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160407/b1c75beb/attachment.html>