[Healeys] Still leaking

I Erbs eyera3000 at gmail.com
Thu Sep 3 11:58:32 MDT 2015


filter on carb side or the tee. I have K&N filters and have not modified
for hose. I have a BJ8 intake manifold. Can I use the power booster vacuum
nipple to directly attach the hose with no pcv device?

Ira Erbs
Portland, OR
   _______                                  _______
     (______ \____1959 BN4____/ _______)
         (_________________________)

On Thu, Sep 3, 2015 at 6:57 AM, <warthodson at aol.com> wrote:

> Is the original crankcase vent. system intact? Or has it been modified in
> some way such as adding a PCV valve, adding a filter in the vent. line,
> removing the vent line from the rear carb air cleaner fitting?
> Gary Hodson
>
>
> -----Original Message-----
> From: David Porter frogeye at porterscustom.com
>
> Ira,
>  check for excessive crankcase pressure.. "blow-by"
> dave
>
> On 9/2/2015 8:10 PM, I Erbs wrote:
>
> Ok I have confirmed that oil is oozing up through the hole on the bottom
> flange of the block!!!
> It's dry under generator plate, dry around both manual furl pump bolts. I
> saw the oil bubble up!
> Wtf do I do now?  Bad sump gasket?????
> Mr. Ira Erbs
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150903/ee01d2fa/attachment.html>


More information about the Healeys mailing list