[Healeys] BN1 rear brake cylinder

[Alan Seigrist]

As long as the rotating drum is able to move it, then it should be okay.
The drums typically can be a tiny bit out of round so as long as it's not
too hard and the drum face can move it when it taps it, it should be okay.

If necessary, you can consider filing it down a bit until it moves a bit
freer.



On Tue, Mar 17, 2015 at 8:48 AM, Jim Richmond <jkrich at gvtc.com> wrote:

> The rear slave cylinder is supposed to "float".  With the backing plate
> off the car, how easily should it slide?  Locking plates from Moss are
> slightly thicker than the originals.  (.012)  It takes a bit of force to
> move it.  Will this be a problem?
>
> Jim Richmond
>
> Sent from my iPad
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150317/4d29003b/attachment.html>